Specifications

Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
SecureStack B2 Configuration Guide 3-39
3.5.4.2 show lacp
Use this command to display information about one or more aggregator ports. Each SecureStack B2
unit provides 6 virtual link aggregator ports, which are designated in the CLI as lag.0.1 through
lag.0.6. Once underlying physical ports (that is, fe.x.x, ge.x.x) are associated with an aggregator
port, the resulting aggregation will be represented as one Link Aggregation Group (LAG) with a
lag.x.x port designation.
show lacp [port-string]
Syntax Description
Command Defaults
If port-string is not specified, link aggregation information for all ports will be
displayed.
Command Mode
Read-Only.
Example
This example shows how to display information for aggregator port 6
:
Table 3-4 provides an explanation of the command output.
port-string (Optional) Displays LACP information for specific LAG
port(s). Valid port designations are lag.0.1 - 6.
B2(rw)->show lacp lag.0.6
Aggregator: lag.0.6
Actor Partner
System Identifier: 00:e0:63:9d:b5:87 00:00:00:00:00:00
System Priority: 32768 32768
Admin Key: 32768
Oper Key: 32768 32768
Attached Ports: None.