Specifications

Link Aggregation Control Protocol (LACP)
Configuring Link Aggregation
SecureStack B2 Configuration Guide 3-37
Commands
The commands used to review and configure LACP are listed below and described in the associated
section as shown.
• show lacp (Section 3.5.4.2)
• set lacp asyspri (Section 3.5.4.3)
• set lacp aadminkey (Section 3.5.4.4)
• clear lacp (Section 3.5.4.5)
• set lacp static (Section 3.5.4.6)
• clear lacp static (Section 3.5.4.7)
• show port lacp (Section 3.5.4.8)
• set port lacp (Section 3.5.4.9)
• clear port lacp (Section 3.5.4.10)