Specifications

Port Configuration Command Set
Enabling / Disabling Jumbo Frame Support
SecureStack B2 Configuration Guide 3-21
3.3.4.1 show port jumbo
Use this command to display the status of jumbo frame support and maximum transmission units
(MTU) on one or more ports.
show port jumbo [port-string]
Syntax Description
Command Defaults
If port-string is not specified, jumbo frame support status for all ports will display.
Command Mode
Read-Only.
Example
This example shows how to display the status of jumbo frame support for ge.1.1:
port-string (Optional) Displays the status of jumbo frame support
for specific port(s). For a detailed description of
possible port-string values, refer to Section 3.1.1.
B2(rw)->show port jumbo ge.1.1
Port Number Jumbo Status Max Frame Size
------------- --------------- ------------------
ge.1.1 Enable 9216