Specifications

Port Configuration Command Set
Reviewing Port Status
SecureStack B2 Configuration Guide 3-7
Admin Status Whether the specified port is enabled (up) or disabled
(down). For details on using the set port disable command
to change the default port status of enabled, refer to
Section 3.3.2.1. For details on using the set port enable
command to re-enable ports, refer to Section 3.3.2.2.
Speed Operational speed in Mbps or Kbps of the specified port. For
details on using the set port speed command to change
defaults, refer to Section 3.3.3.2.
Duplex Duplex mode (half or full) of the specified port. For details
on using the set port duplex command to change defaults,
refer to Section 3.3.5.
Type Physical port and interface type.
Table 3-1 show port status Output Details (Continued)
Output What It Displays...