Specifications
Port Configuration Command Set
Reviewing Port Status
SecureStack B2 Configuration Guide 3-5
3.3.1.1 show port
Use this command to display whether or not one or more ports are enabled for switching.
show port [port-string]
Syntax Description
Command Defaults
If port-string is not specified, operational status information for all ports will be
displayed.
Command Mode
Read-Only.
Example
This example shows how to display operational status information for ge.3.14:
port-string (Optional) Displays operational status for specific port(s).
For a detailed description of possible port-string values,
refer to Section 3.1.1.
B2(rw)->show port ge.3.14
Port ge.3.14 enabled