Specifications

Startup and General Configuration Summary
Resetting the Device
SecureStack B2 Configuration Guide 2-101
2.1.19.2 clear config
Use this command to clear the user-defined configuration parameters.
clear config [all]
Syntax Description
Command Defaults
If all is not specified, stacking configuration parameters will not be cleared.
Command Mode
Read-Write.
Example
This example shows how to clear configuration parameters, including stacking parameters:
NOTES: When using the clear config command to clear configuration parameters in a stack, it
is important to remember the following:
• Use clear config to clear config parameters without clearing stack unit IDs. This command
WILL NOT clear stack parameters and avoids the process of re-numbering the stack.
• Use clear config all when it is necessary to clear all config parameters, including stack unit
IDs and switch priority values.
Configuration parameters and stacking information can also be cleared on the master unit only
by selecting option 10 (restore configuration to factory defaults) from the boot menu on device
startup. This selection will leave stacking priorities on all other units.
all (Optional) Clears user-defined configuration parameters
and stack unit numbers and priorities.
B2(su)->clear config all