Specifications

Startup and General Configuration Summary
Resetting the Device
2-100 SecureStack B2 Configuration Guide
2.1.19.1 reset
Use this command to reset the device without losing any user-defined configuration settings, or to
display information about device resets.
reset [unit]
Syntax Description
Command Defaults
If no unit ID is specified, the entire system will be reset.
Command Mode
Read-Write.
Examples
This example shows how to reset the system:
This example shows how to reset unit 1 in the stack:
NOTE: The reset button located on the rear panel of A SecureStack B2 device is used to reset
administratively set passwords only, pushing the reset button will not cause the unit to reboot.
For information on how to do this, refer to the SecureStack B2 Installation Guide shipped with
your device.
unit (Optional) Specifies a unit to be reset.
B2(su)->reset
Are you sure you want to reload the stack? (y/n) y
Saving Configuration to stacking members
Reloading all switches.
B2(su)->reset 1
Are you sure you want to reload the switch? (y/n) y
Reloading switch 1.
This switch is manager of the stack.
STACK: detach 3 units