Specifications

Startup and General Configuration Summary
Downloading a New Firmware Image
SecureStack B2 Configuration Guide 2-75
3. Type 2. The following baud rate selection screen displays:
4. Type 8 to set the device baud rate to 115200. The following message displays:
5. Set the terminal baud rate to 115200 and press ENTER.
6. From the boot menu options screen, type 4 to load new operational code using XMODEM.
When the XMODEM transfer is complete, the following message and header information will
display:
1 - 1200
2 - 2400
3 - 4800
4 - 9600
5 - 19200
6 - 38400
7 - 57600
8 - 115200
0 - no change
Setting baud rate to 115200, you must change your terminal baud rate.
[Boot Menu] 4
Ready to receive the file with XMODEM/CRC....
Ready to RECEIVE File xcode.bin in binary mode
Send several Control-X characters to cCKCKCKCKCKCKCK
XMODEM transfer complete, checking CRC....
Verified operational code CRC.