Specifications

Startup and General Configuration Summary

Downloading a New Firmware Image

2-74 SecureStack B2 Configuration Guide

2.1.14.2 Downloading via the Serial Port

To download device firmware via the serial (console) port, proceed as follows:

1. With the console port connected, power up the device. The following message displays:

2. Before the boot up completes, type 2. The following boot menu options screen displays.

Enterasys B2-Series Boot Code...

SDRAM Circuit Test of 256MB

100%

Version 1.0.13 6/14/2004

Computing MD5 Checksum of operational code...

Select an option. If no selection in 10 seconds then

operational code will start.

1 - Start operational code.

2 - Start Boot Menu.

Select (1, 2):2

Boot Menu Version 1.0.13 6/14/2004

Options available

1 - Start operational code

2 - Change baud rate

3 - Retrieve event log using XMODEM (64KB).

4 - Load new operational code using XMODEM

5 - Display operational code vital product data

6 - Run Flash Diagnostics

7 - Update Boot Code

8 - Delete operational code

9 - Reset the system

10 - Restore Configuration to factory defaults (delete config files)

[Boot Menu] 2