Specifications

Startup and General Configuration Summary
Configuring Power over Ethernet (PoE)
SecureStack B2 Configuration Guide 2-71
2.1.13.4 show port inlinepower
Use this command to display all ports supporting PoE.
show port inlinepower [port-string]
Syntax Description
Command Defaults
If not specified, information for all PoE ports will be displayed.
Command Mode
Read-Only.
Example
This example shows how to display PoE information for Fast Ethernet ports 1 through 6 on unit 1.
In this case, the ports’ administrative state, PoE priority and class have not been changed from
default values:
port-string (Optional) Displays information for specific PoE port(s).
B2(rw)->show port inlinepower fe.1.1-6
Port Admin Oper Priority Class
------- ----- ---------------- -------- -----
fe.1.1 auto searching low 0
fe.1.2 auto searching low 0
fe.1.3 auto searching low 0
fe.1.4 auto searching low 0
fe.1.5 auto searching low 0
fe.1.6 auto searching low 0