Installation guide

Connecting High-Speed Stacking Cables
SecureStack B2 Installation Guide 3-11
Thehigh‐speedstackingcablesareoptionalitemsandmustbeorderedseparately.The
B2G124‐48andB2H124‐48supportthreetypesofSecureStack stackingcables:
•C2CAB‐SHORTcabletoconnecttwoadjacentswitchesinthestack.Ifthestackis
inaconfigurationwheretheadjacentswitchesaretoofar
apartfortheSHORT
cables,theLONGcablecanbeusedfortheconnections.
•C2CAB‐LONGcabletoconnectfromthetopswitchtothebottomswitchinthe
stack.YouneedonlyoneC2CAB‐LONGcableperstack.
•C2CAB‐5Mcabletoconnectfromthetopswitchtothebottomswitch
inthestack
whenthesetwoswitchesarephysicallylocatedinseperatemountingracksand
requirealongercablereach.
Figure 3‐7showsanexampleofafour‐highstackconnectedinaringtopology.All
STACKDOWNandSTACKUPconnectorsareusedintheinstallation.Thehigh‐speed
stacking
cableconnectionsarefromtheSTACKDOWNconnectorofonesw itchtothe
STACKUPconnectorofthenextswitchupinthestack.Ahigh‐speedstackingcable
connectionfromtheSTACKDOWNconnectoroftheswitchatthetopofthestacktothe
STACKUPconnectorat
thebottomofthestackcompletestheringconnection.Inadaisy
chaintopology,onecableconnectionisnotmade.
Note: The B2G124-24 supports only the C2CAB-SHORT and C2CAB-LONG stacking
cables.