Specifications

show maclock stations
19-52 Authentication and Authorization Configuration
show maclock stations
UsethiscommandtodisplayMAClockinginformationaboutendstationsconnectedtothe
switch.
Syntax
show maclock stations [firstarrival | static] [port-string]
Parameters
Defaults
Ifnoparametersarespecified,MAClockinginformationwillbedisplayedforallendstations.
Mode
Switchcommand,read‐only.
Table 19-6 show maclock Output Details
Output Field What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 7-2.
Port Status Whether MAC locking is enabled or disabled on the port. MAC locking is globally
disabled by default. For details on enabling MAC locking on the switch and on one or
more ports, refer to “set maclock enable” on page 19-53 and “set maclock” on
page 19-54.
Trap Status Whether MAC lock trap messaging is enabled or disabled on the port. For details
on setting this status, refer to “set maclock trap” on page 19-60.
Aging Status Whether aging of FirstArrival MAC addresses is enabled or disabled on the port.
Refer to “set maclock agefirstarrival” on page 19-58.
Max Static Allocated The maximum static MAC addresses allowed locked to the port. For details on
setting this value, refer to “set maclock static” on page 19-56.
Max FirstArrival
Allocated
The maximum end station MAC addresses allowed locked to the port. For details on
setting this value, refer to “set maclock firstarrival” on page 19-57.
Last Violating MAC
Address
Most recent MAC address(es) violating the maximum static and first arrival value(s)
set for the port.
firstarrival (Optional)DisplaysMAClockinginformationaboutendstationsfirst
connectedtoMAClockedports.
static (Optional)DisplaysMAClockinginformationaboutstatic(management
defined)endstationsconnectedtoMAClockedports.
port‐string (Optional)Displaysendstationinformationforspecifiedport(s).Fora
detaileddescriptionofpossibleport‐stringvalues,refer
to“PortString
SyntaxUsedintheCLI”onpage 7‐2.