Specifications

set macauthentication macreauthenticate
SecureStack B2 Configuration Guide 19-29
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoforcege.2.1though5toreauthenticate:
B2(su)->set macauthentication portreauthentication ge.2.1-5
set macauthentication macreauthenticate
UsethiscommandtoforceanimmediatereauthenticationofaMACaddress.
Syntax
set macauthentication macreauthenticate mac-addr
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoforcetheMACauthenticationsessionforaddress00‐60‐97‐b5‐4c‐07
toreauthenticate:
B2(su)->set macauthentication macreauthenticate 00-60-97-b5-4c-07
set macauthentication reauthperiod
UsethiscommandtosettheMACreauthenticationperiod(inseconds).Thisisthetimelapse
betweenattemptstoreauthenticateanycurrentMACaddressauthenticatedtoaport.
Syntax
set macauthentication reauthperiod time port-string
port‐string SpecifiesMACauthenticationport(s)tobereauthenticated.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage 7‐2.
mac‐addr SpecifiestheMACaddressofthesessiontoreauthenticate.