Specifications

show dhcpsnooping port
18-12 DHCP Snooping and Dynamic ARP Inspection
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thiscommanddisplayswherethedatabasefileisstored(locally)andwhatthewritedelayvalue
is.
Example
Thisexampleshowstheoutputoftheshowdhcpsnoopingdatabasecommand.
B2(su)->show dhcpsnooping database
agent url: local
write-delay: 300
show dhcpsnooping port
UsethiscommandtodisplayDHCPsnoopingconfigurationparametersforspecificports.
Syntax
show dhcpsnooping port port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Thiscommanddisplaysthetruststateandratelimitingparametersconfiguredonthespecified
ports.
Example
Thisexampleshowstheoutputoftheshowdhcpsnoopingportcommand.
B2(su)->show dhcpsnooping port ge.1.1
Interface Trust State Rate Limit Burst Interval
(pps) (seconds)
---------- ------------- ------------- ---------------
ge.1.1 No 20 2
port‐string Specifiestheportorportsforwhichtodisplayconfiguration
information.