Specifications

set switch description
2-10 Configuring Switches in a Stack
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoreplicatethemanagementimagefiletoallswitchesinthest ack:
B2(su)->set switch copy-fw
Are you sure you want to copy firmware? (y/n) y
Code transfer completed successfully.
set switch description
Usethiscommandtoassignanametoaswitchinthestack.
Syntax
set switch description unit description
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoassignthename“FirstUnit” toswitchunit1inthestack:
B2(su)->set switch description 1 FirstUnit
set switch movemanagement
Usethiscommandtomovemanagementsw itchfunctionalityfromoneswitchtoanother.
Syntax
set switch movemanagement fromunit tounit
Parameters
Defaults
None.
unit Specifiesaunitnumberfortheswitch.
description Specifiesatextdescriptionfortheunit.
fromunit Specifiestheunitnumberofthecurrentmanagementswitch.
tounit Specifiestheunitnumberofthenewly‐designatedmanagementswitch.