Specifications

set dhcpsnooping
SecureStack B2 Configuration Guide 18-5
set dhcpsnooping
UsethiscommandtoenableordisableDHCPsnoopingglobally.
Syntax
set dhcpsnooping {enable | disable}
Parameters
Defaults
Disabledglobally.
Mode
Switchcommand,read‐write.
Usage
Bydefault,DHCPsnoopingisdisabledgloballyandonallVLANs.Youmustenableitglobally
withthiscommand,andthenenableitonspecificVLANs.
Example
ThefollowingexampleenablesDHCPsnoopingglobally.
B2(rw)->set dhcpsnooping enable
set dhcpsnooping vlan
UsethiscommandtoenableordisableDHCPsnoopingonaVLANorrangeofVLANs.
Syntax
set dhcpsnooping vlan vlan-range {enable | disable}
Parameters
Defaults
DHCPsnoopingisdisabledbydefaultonallVLAN s.
Mode
Switchcommand,read‐write.
enable EnableDHCPsnoopinggloballyontheswitch.
disable DisableDHCPsnoopinggloballyontheswi tch.
vlan‐range SpecifiestheVLANorrangeofVLANsonwhichDHCPsnoopingisto
beenabledordisabled.
enable|disable EnablesordisablesDHCPsnoopingforthespecifiedVLANs.