Specifications

set dhcp pool
17-12 DHCP Server Configuration
set dhcp pool
UsethiscommandtocreateandassignanametoaDHCPserverpoolofaddresses.Upto16
addresspoolsmaybeconfiguredonaSecureStackB2.Notethatenteringthiscommandisnot
requiredtocreateanaddresspoolbeforeconfiguringotheraddresspoolparameters.
Syntax
set dhcp pool poolname
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexamplecreatesanaddresspoolnamed“auto1.”
B2(rw)->set dhcp pool auto1
set dhcp pool next-server 17-20
clear dhcp pool next-server 17-20
set dhcp pool lease 17-21
clear dhcp pool lease 17-21
set dhcp pool default-router 17-22
clear dhcp pool default-router 17-22
set dhcp pool dns-server 17-23
clear dhcp pool dns-server 17-23
set dhcp pool domain-name 17-24
clear dhcp pool domain-name 17-24
set dhcp pool netbios-name-server 17-25
clear dhcp pool netbios-name-server 17-25
set dhcp pool netbios-node-type 17-26
clear dhcp pool netbios-node-type 17-26
set dhcp pool option 17-27
clear dhcp pool option 17-28
show dhcp pool configuration 17-28
For information about... Refer to page...
poolname Specifiesthenameoftheaddresspool.Poolnamesmaybeupto31
charactersinlength.