Specifications

Configuring General DHCP Server Parameters
SecureStack B2 Configuration Guide 17-3
Configuring General DHCP Server Parameters
Purpose
ToconfigureDHCPserverparameters,andtodisplayandclearaddressbindinginformation,
serverstatistics,andconflictinformation.
Commands
set dhcp
UsethiscommandtoenableordisabletheDHCPserverfunctionalityontheSecureStackB2.
Syntax
set dhcp {enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
For information about... Refer to page...
set dhcp 17-3
set dhcp bootp 17-4
set dhcp conflict logging 17-4
show dhcp conflict 17-5
clear dhcp conflict 17-5
set dhcp exclude 17-6
clear dhcp exclude 17-7
set dhcp ping 17-7
clear dhcp ping 17-8
show dhcp binding 17-8
clear dhcp binding 17-9
show dhcp server statistics 17-9
clear dhcp server statistics 17-10
enable|disable EnablesordisablesDHCPserverfunctionality.Bydefault,DHCPserveris
disabled.