Specifications

show switch
2-6 Configuring Switches in a Stack
show switch
Usethiscommandtodisplayinformationaboutoneormoreunitsinthestack.
Syntax
show switch [status] [unit]
Parameters
Defaults
Ifnotspecified,statusandotherconfigurationinformationaboutallunitswillbedisplayed.
Mode
Switchcommand,read‐only.
Usage
Afterastackhasbeenconfigured,youcanusethiscommandtophysicallyconfirmtheidentityof
eachunit.Whenyouenterthecommandwithaunitnumber,theMGRLEDofthespecified
switchwillblinkfor10seconds.ThenormalstateofthisLEDisoffformemberunits
andsteady
greenforthemanagerunit.
Examples
Thisexampleshowshowtodisplayinformationaboutallswitchunitsinthestack:
B2(rw)->show switch
Management Preconfig Plugged-in Switch Code
Switch Status Model ID Model ID Status Version
------ ------------ ------------- ------------- --------------------- --------
1 Mgmt Switch B2G124-24 B2G124-24 OK 04.02.xx
2 Stack Member B2G124-24 B2G124-24 OK 04.02.xx
3 Stack Member B2G124-24 B2G124-24 OK 04.02.xx
4 Stack Member B2G124-24 B2G124-24 OK 04.02.xx
5 Stack Member B2G124-24 B2G124-24 OK 04.02.xx
6 Stack Member B2G124-24 B2G124-24 OK 04.02.xx
7 Stack Member B2G124-24 B2G124-24 OK 04.02.xx
show switch stack-ports 2-8
set switch 2-9
set switch copy-fw 2-9
set switch description 2-10
set switch movemanagement 2-10
set switch member 2-11
clear switch member 2-11
For information about... Refer to page...
status (Optional)Displayspowerandadministrativestatusinformationforone
ormoreunitsinthestack.
unit (Optional)Specifiestheunit(s)forwhichinformationwilldisplay.