Specifications

History Group Commands
16-6 RMON Configuration
History Group Commands
Purpose
Todisplay,configure,andclearRMONhistorypropertiesandstatistics.
Commands
show rmon history
UsethiscommandtodisplayRMONhistorypropertiesandstatistics.TheRMONhistorygroup
recordsperiodicstatisticalsamplesfromanetwork.
Syntax
show rmon history [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,informationaboutallRMONhistoryentrieswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayRMONhistoryentriesforGigabitEthernetport1inswitch1.
Acontrolentrydisplaysfirst,followedbyactualentriescorrespondingtothecontrolentry.Inthis
case,thedefaultsettingsforentryowner,samplinginterval,andmaximumnumberofentries.
(buckets)havenotbeen
changedfromtheirdefaultvalues.Foradescriptionofthetypesof
statisticsshown,refertoTable 16‐42.
:
B2(su)->show rmon history fe.1.1
Port: fe.1.1
-------------------------------------
Index 1
Owner = monitor
Status = valid
Data Source = ifIndex.1
Interval = 30
Buckets Requested = 50
Buckets Granted = 10
For information about... Refer to page...
show rmon history 16-6
set rmon history 16-7
clear rmon history 16-7
port‐string (Optional)DisplaysRMONhistoryentriesforspecificport(s).