Specifications

clear nodealias config
SecureStack B2 Configuration Guide 15-37
Itʹsimportanttomakesurethatinter‐switchlinksare notlearningnode/aliasinformation,asit
wouldslowdownsearchesbytheNetSightCompassandASMtoolsandgiveinaccurateresults.
Example
Thisexampleshowshowtodisablethenodealiasagentonfe.1.3:
B2(su)->set nodealias disable fe.1.3
clear nodealias config
Usethiscommandtoresetnodealiasstatetoenabledandclearthemaximumentriesvalue.
Syntax
clear nodealias config port-string
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
Thisexampleshowshowtoresetthenodealiasconfigurationonfe.1.3:
B2(su)->clear nodealias config fe.1.3
port‐string Specifiestheport(s)onwhichtoresetthenodealiasconfiguration.