Specifications

Configuring Simple Network Time Protocol (SNTP)
SecureStack B2 Configuration Guide 15-27
Example
Thisexampleenablesmulticastfloodprotection.
B2(su)->set mac unreserved-flood enable
Configuring Simple Network Time Protocol (SNTP)
Purpose
ToconfiguretheSimpleNetworkTimeProtocol(SNTP),whichsynchronizesdeviceclocksina
network.
Commands
show sntp
UsethiscommandtodisplaySNTPclientsettings.
Syntax
show sntp
Parameters
None.
Note: A host IP address must be configured on the B2 to support SNTP.
For information about... Refer to page...
show sntp 15-27
set sntp client 15-29
clear sntp client 15-29
set sntp server 15-30
clear sntp server 15-30
set sntp poll-interval 15-31
clear sntp poll-interval 15-31
set sntp poll-retry 15-32
clear sntp poll-retry 15-32
set sntp poll-timeout 15-33
clear sntp poll-timeout 15-33
set timezone 15-33