Specifications

SecureStack B2 Configuration Guide 15-1
15
Logging and Network Management
Thischapterdescribesswitch‐relatedloggingandnetworkmanagementcommandsandhowto
usethem.
Configuring System Logging
Purpose
Todisplayandconfiguresystemlogging,includingSyslogserversettings,Syslogdefaultsettings,
andtheloggingbuffer.
Commands
Note: The commands in this chapter pertain to network management of the SecureStack B2
device from the switch CLI only.
For information about... Refer to page...
Configuring System Logging 15-1
Monitoring Network Events and Status 15-12
Managing Switch Network Addresses and Routes 15-17
Configuring Simple Network Time Protocol (SNTP) 15-27
Configuring Node Aliases 15-35
For information about... Refer to page...
show logging server 15-2
set logging server 15-3
clear logging server 15-4
show logging default 15-4
set logging default 15-5
clear logging default 15-6
show logging application 15-6
set logging application 15-7