Specifications

set igmpsnooping maxresponse
SecureStack B2 Configuration Guide 14-5
Example
ThisexampleshowshowtosettheIGMPgroupmembershipintervalto250seconds:
B2(su)->set igmpsnooping groupmembershipinterval 250
set igmpsnooping maxresponse
UsethiscommandtoconfiguretheIGMPquerymaximumresponsetimeforthesystem.
Syntax
set igmpsnooping maxresponse time
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
ThisvaluemustbelessthantheIGMPmaximum responsetimedescribedin“setigmpsnooping
groupmembershipinterval”onpage 14‐4.
Example
ThisexampleshowshowtosettheIGMPmaximumresponsetimeto100seconds:
B2(su)->set igmpsnooping maxresponse 100
set igmpsnooping mcrtrexpiretime
UsethiscommandtoconfiguretheIGMPmulticastrouterexpirationtimefor thesystem.
Syntax
set igmpsnooping mcrtrexpire time
Parameters
time SpecifiestheIGMPmaximumqueryresponsetime.Validvaluesare100‐
255seconds.Thedefaultvalueis100seconds.
Thisvalueworkstogetherwiththesetigmpsnooping
groupmembershipintervalcommandtoremoveportsfromanIGMPgroup
andmustbelesserthanthegroupmembershipintervalvalue.
time SpecifiestheIGMPmulticastrouterexpirationtime.Validvaluesare0‐
3600seconds.Avalueof0willconfigurethesystem withaninfinite
expirationtime.Thedefaultvalueis0.