Specifications

set cos state
12-20 Policy Classification Configuration
B2(su)->set cos state enable
B2(su)->set cos port-resource flood-ctrl 1.0 broadcast rate 5
B2(su)->set cos port-config flood-ctrl 1.0 ports fe.1.2;fe.2.2 append
Commands
set cos state
UsethiscommandtoenableordisableClassofService.
Syntax
set cos state {enable | disable}
Parameters
Defaults
None.
For information about... Refer to page...
set cos state 12-20
show cos state 12-21
clear cos state 12-21
set cos settings 12-22
clear cos settings 12-23
show cos settings 12-23
set cos port-config 12-24
show cos port-config 12-25
clear cos port-config 12-26
set cos port-resource irl 12-27
show cos port-resource 12-29
clear cos port-resource irl 12-30
set cos reference 12-31
show cos reference 12-32
clear cos reference 12-33
show cos unit 12-34
clear cos all-entries 12-35
show cos port-type 12-35
enable|disable EnablesordisablesClassofServiceontheswitch.Defaultstateis
disabled.