Specifications

Assigning Ports to Policy Profiles
SecureStack B2 Configuration Guide 12-15
Assigning Ports to Policy Profiles
Purpose
Toassignandunassignportstopolicyprofiles.
Commands
set policy port
Usethiscommandtoassignportstoapolicyprofile.
Syntax
set policy port port-string profile-index
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoallowGigabitEthernetports5through15inslot1totransmitframes
accordingtopolicyprofile1:
B2(su)->set policy port fe.1.5-15 1
Note: The B2 switch supports up to three user policies per port.
For information about... Refer to page...
set policy port 12-15
clear policy port 12-16
port‐string Specifiestheport(s)toaddtothepolicyprofile.Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedintheCLI”
onpage 7‐2.
profile‐index SpecifiestheIDofthepolicyprofile(role)towhichtheport(s)willbe
added.Thisvalue
mustmatchtheprofile‐indexvalueassigned usingthe
setpolicyprofilecommand(“setpolicyprofile”onpage 12‐3)inorder
forapolicyprofiletobeactiveonthespecifiedport.