Specifications

set gvrp
SecureStack B2 Configuration Guide 10-23
Example
ThisexampleshowshowtodisplayGARPtimerinformationonports1through10inslot1:
B2(su)->show garp timer fe.1.1-10
Port based GARP Configuration: (Timer units are centiseconds)
Port Number Join Leave Leaveall
----------- ---------- ---------- ----------
fe.1.1 20 60 1000
fe.1.2 20 60 1000
fe.1.3 20 60 1000
fe.1.4 20 60 1000
fe.1.5 20 60 1000
fe.1.6 20 60 1000
fe.1.7 20 60 1000
fe.1.8 20 60 1000
fe.1.9 20 60 1000
fe.1.10 20 60 1000
Table 10‐27providesanexplanationofthecommandoutput.Fordetailsonusingthesetgvrp
commandtoenableordisableGVRP, referto“setgvrp”onpage 10‐23.Fordetailsonusingtheset
garptimercommandtochange defaulttimervalues,referto“setgarptimer”on
page 10‐24.
set gvrp
UsethiscommandtoenableordisableGVRPgloballyonthe deviceorononeormoreports.
Syntax
set gvrp {enable | disable} [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,GVRPwillbedisabledorenabledforallports.
Note: For a functional description of the terms join, leave, and leaveall timers, refer to the
standard IEEE 802.1Q documentation, which is not supplied with this device.
Table 10-27 show gvrp configuration Output Details
Output Field What It Displays...
Port Number Port designation. For a detailed description of possible port-string values, refer to
“Port String Syntax Used in the CLI” on page 7-2.
Join Join timer setting.
Leave Leave timer setting.
Leaveall Leavall timer setting.
disable|
enable
DisablesorenablesGVRPonthedevice.
port‐string (Optional)DisablesorenablesGVRPonspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsedin
theCLI”onpage 7‐2.