Specifications

set port jumbo
7-14 Port Configuration
set port jumbo
Usethiscommandtoenableordisablejumboframesupportononeormoreports.
Syntax
set port jumbo {enable | disable}[port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,jumboframesupportwillbeenabledordisabledonallports.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoenablejumboframesupportforGigabitEthernetport14inslot3:
B2(su)->set port jumbo enable fe.3.14
clear port jumbo
Usethiscommandtoresetjumboframesupportstatustoenabledononeormoreports.
Syntax
clear port jumbo [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,jumboframesupportstatuswillberesetonallports.
Mode
Switchcommand,read‐write.
Example
ThisexampleshowshowtoresetjumboframesupportstatusforGigabitEthernetport14inslot 3:
B2(su)->clear port jumbo fe.3.14
enable|disable Enablesordisablesjumboframesupport.
port‐string (Optional)Specifiestheport(s)onwhichtodisableorenablejumbo
framesupport.Foradetaileddescriptionofpossibleport‐stringvalues,
referto“PortStringSyntaxUsedintheCLI”onpage7‐2.
port‐string (Optional)Specifiesthe port(s)onwhichtoresetjumboframe
supportstatustoenabled.Foradetaileddescriptionofpossible
port‐stringvalues,referto“PortStringSyntaxUsedintheCLI”on
page7‐2.