Specifications

show port alias
7-8 Port Configuration
show port alias
Usethiscommandtodisplaythealias nameforoneormoreports.
Syntax
show port alias [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,aliasesforallportswillbedisplayed.
Mode
Switchcommand,read‐only.
Example
Thisexampleshowshowtodisplayaliasinformationforports1‐3onslot3:
B2(rw)->show port alias fe.3.1-3
Port fe.3.1 user
Port fe.3.2 user
Port fe.3.3 Admin
set port alias
Usethiscommandtoassignanaliasnametoaport.
Syntax
set port alias port-string [name]
Parameters
Defaults
Ifnameisnotspecified,the aliasassignedtotheportwillbecleared.
Mode
Switchcommand,read‐write.
port‐string (Optional)Displaysaliasname(s)forspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortSt ringSyntax
UsedintheCLI”onpage7‐2.
port‐string Specifiestheporttowhichanaliaswillbeassigned.Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntax
UsedintheCLI”onpage7‐2.
name (Optional)Assignsan aliasnametotheport.Ifthealiasnamecontains
spaces,thetext
stringmustbesurroundedbydoublequotes.Maximum
lengthis60characters.