Specifications

show port counters
SecureStack B2 Configuration Guide 7-5
show port counters
Usethiscommandtodisplayportcounterstatisticsdetailingtrafficthroughthedeviceand
throughallMIB2networkdevices.
Syntax
show port counters [port-string] [switch | mib2]
Parameters
Defaults
Ifport‐stringisnotspecified,counterstatisticswillbedisplayedforallports.
Ifmib2orswitcharenotspecified,allcounterstatisticswillbedisplayedforthespecifiedport(s).
Mode
Switchcommand,read‐only.
Examples
Thisexampleshowshowtodisplayallcounterstatistics,includingMIB2networktrafficand
trafficthroughthedeviceforfe.3.1:
B2(su)->show port counters fe.3.1
Port:
fe.3.1 MIB2 Interface: 1
No counter discontinuity time
-----------------------------------------------------------------
MIB2 Interface Counters
-----------------------
In Octets 0
In Unicast Pkts 0
In Multicast Pkts 0
In Broadcast Pkts 0
In Discards 0
In Errors 0
Out Octets 0
Out Unicasts Pkts 0
Out Multicast Pkts 0
Out Broadcast Pkts 0
Out Errors 0
802.1Q Switch Counters
----------------------
Frames Received 0
Frames Transmitted 0
port‐string (Optional)Displayscounterstatisticsforspecificport(s).Foradetailed
descriptionofpossibleport‐stringvalues,referto“PortStringSyntaxUsed
intheCLI”onpage7‐2.
switch|mib2 (Optional)DisplaysswitchorMIB2statistics. Switchstatisticsdetail
performanceoftheSecureStackB2device.MIB2
interfacestatisticsdetail
performanceofallnetworkdevices.