Specifications

show lldp port trap
6-16 Discovery Protocol Configuration
Tx-Enabled Ports : fe.1.1-60; fe.2.1-24; fe.3.1-30; fe.4.1-12
Rx-Enabled Ports : fe.1.1-60; fe.2.1-24; fe.3.1-30; fe.4.1-12
show lldp port trap
Usethiscommandtodisplaytheportsthatareenabled tosendanLLDPnotificationwhena
remotesystemchangehasbeendetectedoranLLDP‐MEDnotificationwhenachangeinthe
topologyhasbeensensed.PortsareenabledtosendLLDPnotificationswiththesetlldpporttrap
command
andtosendLLDP‐MEDnotificationswiththesetlldpportmed‐trapcommand.
Syntax
show lldp port trap [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,LLDPporttrapinformationwillbedisplayedforallports.
Mode
Switchcommand,read‐only.
Example
ThisexampleshowshowtodisplayLLDPporttrapinformationforallports.
B2(ro)->show lldp port trap
Trap-Enabled Ports :
MED Trap-Enabled Ports:
show lldp port tx-tlv
UsethiscommandtodisplayinformationaboutwhichoptionalTLVshavebeenconfiguredtobe
transmittedonports.PortsareconfiguredtosendoptionalTLVswiththesetlldpporttx‐tlv
command.
Syntax
showlldpporttx‐tlv[port‐string]
Parameters
Defaults
Ifport‐stringisnotspecified,TLVconfigurationinformationwillbedisplayedforallports.
port‐string (Optional)Displaystheportorrangeofportsthathavebeenenabled
tosendLLDPand/orLLDP‐MEDnotifications.
port‐string (Optional)DisplaysinformationaboutTLVconfigurationforoneora
rangeofports.