Specifications

show license
4-4 Activating Licensed Features
show license
Usethiscommandtodisplaylicensekeyinformationfor switcheswithactivatedlicenses.
Syntax
show license [unit number]
Parameters
Defaults
Ifnounitnumberisspecified,licensekeyinformationforallswitchesinthestackisdisplayed.
Mode
Switchcommand,read‐only.
Usage
Licensescanbedisplayed,applied,andclearedonlywiththelicensecommandsdescribedinthis
chapter.General configurationcommandssuchasshowconfigorclearconfigdonotaffect
licenses.
Example
Thisexampleshowshowtodisplaylicensekeyinformationforswitchunit1inthestack.
B2(ro)->show license unit 1
unit 1
key: INCREMENT B2Policy 2006.0728 permanent 31173CAC6495 045100039001
status: Active
clear license
Usethiscommandtoclearthelicensekeysettings..
Syntax
clear license featureId
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
unitnumber (Optional)Specifiestheswitchforwhichtodisplaylicenseinformation.
RefertoChapter 2,ConfiguringSwitchesinaStack,formore
informationaboutstackunitIDs,ornumbers.
featureIDfeature Thenameofthefeaturebeingcleared.