Specifications

set license
SecureStack B2 Configuration Guide 4-3
set license
UsethiscommandtoactivatetheSecureStackB2licensedfeatures.
Syntax
set license type feature DBV expiration key hostid
Parameters
Defaults
None.
Mode
Switchcommand,read‐write.
Usage
Ifmultipleswitchesareusedinastack,anindividuallicenseisrequiredforeachstackmember.
Referto“LicensingProcedureinaStackEnvironment”onpage 4‐1formoreinformation.
Whenactivatinglicenseswiththiscommand,EnterasysNetworksrecommendsthatyoucopyand
pastetheentirelicensecharacterstring,
ratherthanenterthetextmanually.Ifyouenterthe
characterstringmanually,ensurethatyouexactlymatchthecapitalizationofthecharacterstring
senttoyou.
Everylicenseisassociatedwithaspecifichardwareplatform,basedontheserialnumberofthe
hardwareplatform.Ifyouneedtomovea
licensefromonehardwareplatformtoanother,you
mustcontactEnterasysCustomerSupporttoarrangeforre‐hostingofthelicense.
Example
Thisexampleshowshowtoactivateapermanentlicensekeyontheswitchwithserialnumber
075103099041.Inthisexample,theswitchisastand‐aloneunitsoitsunitnumberis1.
B2(rw)->set license INCREMENT B2Policy 2008.0212 permanent DF6A8558E5AB
075103099041
Validating license on unit 1
License successfully validated and set on unit 1
B2(rw)->
type Specifiesthetypeoflicense.FortheSecureStackB2,thevalueinthisfield
isalwaysINCREMENT.
feature Thenameofthefeaturebeinglicensed.
DBV Adate‐relatedstringgeneratedaspartofthelicense.
expiration Indicateswhetherthelicenseisapermanentoranevaluationlicense.If
thelicenseisan
evaluationlicense,thisfieldwillcontaintheexpiration
dateofthelicense.Ifthelicenseisapermanentlicense,thisfieldwill
containtheword“permanent.”
key Thelicensekey.
hostid Theserialnumberoftheswitchtowhichthislicenseapplies.