Installation guide

CUSTOMER RELEASE NOTES
10/17/07 P/N: 9038177-17 Subject to Change Without Notice Page: 6 of 21
F0615-O
Upgrade Scenario:
To upgrade an RBT-8xx0 switch from one RBT switch Version to another, type commands such as the
following.
Note: This upgrade scenario uses the firmware image file 6.0.4.4 to show the download features. Please
follow these procedures for any of the 4.0.x, 4.1.x, 4.2.x, and 5.0.x firmware images.
Note: This example copies the image file into boot partition 1. On your switch, copy the image file into
the boot partition not used for the last restart. For example, if the switch booted from boot partition 1, copy
the new image into boot partition 0. To see boot partition information, type the show boot command.
RBT-8200# save config success: configuration saved.
RBT-8200# backup system tftp:/[ip-addr]/sysa_bak success: sent 28263 bytes in 0.324 seconds [ 87231
bytes/sec]
RBT-8200# copy tftp://[ip-addr]/R2060404.REL boot1:R2060404.REL success: received 11159702 bytes
in 18.391 seconds [606802 bytes/sec]
RBT-8200# set boot partition boot1 success: Boot partition set to boot1.
RBT-8200# show boot
Configured boot version: 6.0.4.4.0
Configured boot image: boot1: R2060404.rel
Configured boot configuration: file:configuration
Backup boot configuration: file:backup
Booted version: 5.0.12.2.0
Booted image: boot0:R2050C02.REL
Booted configuration: file:configuration
Product model: RBT-8200
Upgrading an Individual Switch Using the RoamAbout Switch Manager (RASM)
Please refer to the chapter ―Managing and Monitoring Your Network‖, section ―Distributing Image and
Configuration Files‖ in the RoamAbout Switch Manager User’s Guide when upgrading the RBT-8xx0 switch to
the released version.
SYSTEM PARAMETER SUPPORT:
RoamAbout System Parameters:
Parameter:
Supported Value:
RBT switches in a single Network Domain
500
RBT switches in a single Mobility Domain
32
Roaming VLANs per RBT switch
300
Does not include local statically configured VLANs
VLANs per Mobility Domain
400
This number consists of 300 roaming VLANs plus 100 local
statically configured VLANs
DAPs per RBT switch
RBT-81x0: 60 configured, 24 active
RBT-82x0: 180 configured, 72 active
RBT-8400: 300 configured, 120 active
SSIDs per radio
8
Minimum link speed within a Mobility Domain
128 Kbps