Installation guide

CUSTOMER RELEASE NOTES
10/17/07 P/N: 9038177-17 Subject to Change Without Notice Page: 16 of 21
F0615-O
Tech Tip for the Channel availability for the new DFS2 model Access Points
DFS2 compliant Access Points support fewer channels than non-DFS2 compliant Access points. The following
tables list the available channels for Access Points.
Pre DFS2 regulations: 13 Channels supported. Support includes all APs that do not have the AP ID of ―C‖
designation.
FREQUENCY RANGE in GHz
# of CHANNELS
CHANNELS
5.15 - 5.25 INDOOR ONLY
50mW
4
36,40,44,48
5.25 - 5.35
4
52,56,60,64
5.725 – 5.825
5
149, 153, 157, 161,165
DFS2 compliant regulations: Enterasys supports the following channels on any APxxxx designated with an AP
ID ―C.‖ There are nine (9) total channels supported, and the DFS2 channels have been disabled.
FREQUENCY RANGE in GHz
# of CHANNELS
CHANNELS
5.15 - 5.25 INDOOR ONLY
50mW
4
36,40,44,48
5.725 – 5.825
5
149, 153, 157, 161,165
IETF STANDARDS PROTOCOL SUPPORT:
Groups
Supported
RFC No. / Title
Description
Security and AAA
RFC 2246
Transport Layer Security (TLS)
RFC 2284
EAP
RFC 2315
PKCS #7: Cryptographic Message Syntax
Version 1.5
RFC 2548
Microsoft RADIUS VSAs
RFC 2716
PPP EAP-TLS Authentication Protocol
RFC 2759
Microsoft PPP CHAP Extensions, Version 2
RFC 2865
RADIUS Authentication
RFC 2866
RADIUS Accounting
RFC 2868
RADIUS Attributes for Tunnel Protocol Support
RFC 2869
RADIUS Extensions
RFC 2986
PKCS #10: Certification Request Syntax
Specification Version 1.7
RFC 3580
IEEE 802.1X RADIUS Guidelines
RFC 3546
Transport Layer Security (TLS) Extensions
draft-josefsson-pppext-eap-tls-eap
Protected EAP Protocol (PEAP)
draft-kamath-pppext-peapv0-00.txt
Microsoft PEAP
draft-kamath-pppext-eap-mschapv2
Microsoft EAP
CHAP extensions v2
IEEE
IEEE Std 802.1X-2001
Port-Based Network Access Control
IEEE Std 802.11i
Enhanced Security for 802.11 Wireless
Networks Based on AES
IEEE Std 802.11h