User`s guide

Preparing the Device for Router Mode
Matrix DFE Series and N-SA User’s Guide 3-19
DHCP Pool
Configuration Mode
Configure a DHCP
server address pool.
Type ip dhcp pool
and the address pool
name from Global
Configuration Mode.
Matrix>Router1
(config-dhcp-pool)#
DHCP Class
Configuration Mode
Configure a DHCP
client class.
Type client-class
and the client class
name from DHCP
Pool or Host
Configuration Mode.
Matrix>Router1
(config-dhcp-class)#
DHCP Host
Configuration Mode
Configure DHCP host
parameters.
Type client-
identifier and the
identifier, or
hardware-address
and an address from
any DHCP
configuration mode.
Matrix>Router1
(config-dhcp-host)#
Note: To jump to a lower configuration mode, type exit at the command prompt. To revert back to
switch CLI, type exit from Privileged EXEC router mode.
Table 3-6 Router Configuration Modes (continued)
Use this mode... To... Access method... Resulting Prompt...