User`s guide

Using WebView
2-14 Getting Started
4. Verifylicenseactivation:
show license
Using WebView
WebViewistheEnterasysNetworksembeddedwebserverfordeviceconfigurationand
managementtasks.Bydefault,WebViewisenabledonTCPportnumber80oftheMatrixdevice.
YoucanverifyWebViewstatus,enableordisableWebView,andresettheWebViewportas
describedinthefollowingsection.
Changing WebView Status and Default Port
UsethefollowingcommandstodisplayWebViewstatus,enableordisableWebView,ortosetthe
WebViewport:
1. (Optional)VerifyWebViewstatus:
show webview
2. EnableordisableWebView:
set webview {enable | disable}
3. SetadifferentTCPportthroughwhichtorunWebView:
set webview port webview_port