Specifications

IP Configuration Command Set
Configuring Load Sharing Network Address Translation (LSNAT)
Matrix DFE-Gold Series Configuration Guide 11-73
11.2.8.2 ip slb ftpctrlport
Use this command to specify an FTP control port for load balancing functionality. By default, this
is port 21.
ip slb ftpctrlport port-number
Syntax Description
Command Syntax of the “no” Form
The “no” form of this command resets the FTP control port to 21:
no ip slb ftpctrlport
Command Type
Router command.
Command Mode
Global configuration mode: Matrix>Router1(config)#
Command Defaults
None.
Example
This example shows how to specify port 46 as the FTP control port for server load balancing:
port-number Specifies an FTP port number
Matrix>Router1(config)#ip slb ftpctrlport 46