Specifications

IP Configuration Command Set
Configuring PIM
11-58 Matrix DFE-Gold Series Configuration Guide
11.2.7.8 show ip pim neighbor
Use this command to display information about discovered PIM neighbors.
show ip pim neighbor [interface]
Syntax Description
Command Type
Router command.
Command Mode
Privileged EXEC: Matrix>Router1#
Command Defaults
If not specified, information about all PIM interfaces will be displayed.
Example
This example shows how to display PIM neighbor information:
Table 11-6 provides an explanation of the command output.
interface (Optional) Displays information about a specific PIM
interface. This interface must be enabled with PIM as
described in Section 11.2.7.1.
Matrix>Router1#show ip pim neighbor
Neighbor Address Vlan DR Priority Uptime Expires Mode
------------------------------------------------------------------------------
10.0.0.2 10 1 00:03:34 00:01:40 PIMSM_MODE (DR)
Table 11-6 show ip pim neighbor Output Details
Output What It Displays...
Neighbor Address IP address of the PIM neighbor.
Vlan VLAN ID of the PIM interface.
DR Priority DR priority of the neighbor.
Uptime Interval in hours, minutes, and seconds the entry has been in
the PIM neighbor table.