Specifications

IP Configuration Command Set
Reviewing IP Traffic and Configuring Routes
Matrix DFE-Gold Series Configuration Guide 11-35
11.2.6 Reviewing IP Traffic and Configuring Routes
Purpose
To review IP protocol information about the device, to review IP traffic and configure routes, to
enable and send router ICMP (ping) messages, and to execute traceroute.
Commands
The commands used to review IP traffic and configure routes are listed below and described in the
associated section as shown:
• show ip protocols (Section 11.2.6.1)
• show ip traffic (Section 11.2.6.2)
• clear ip stats (Section 11.2.6.3)
• show ip route (Section 11.2.6.4)
• ip route (Section 11.2.6.5)
• ip icmp (Section 11.2.6.6)
• ping (Section 11.2.6.7)
• traceroute (Section 11.2.6.8)