Specifications

General Configuration Command Set
Setting Basic Device Properties
2-60 Matrix DFE-Gold Series Configuration Guide
2.2.3.14 show summertime
Use this command to display daylight savings time settings.
show summertime
Syntax Description
None.
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Only.
Example
This example shows how to display daylight savings time settings:
Matrix(rw)->show summertime
Summertime is disabled and set to ''
Start : SUN APR 04 02:00:00 2004
End : SUN OCT 31 02:00:00 2004
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the first Sunday of April and ending at 2:00
of the last Sunday of October