Specifications

IP Configuration Command Set
Performing a Basic Router Configuration
11-18 Matrix DFE-Gold Series Configuration Guide
11.2.3.3 Configuring the Router
You can configure the router using either of the following methods.
Using a downloaded file...
1. Download a router config file to the standalone or chassis using the copy command as described
in Section 2.2.9.5.
2. Run the configure command using the downloaded config file as described in Section 2.2.9.4.
Creating and saving a custom file...
1. Configure a module for routing using the set router command as described in Section 2.3.2.2.
2. Enable the router as described in Section 2.3.3 and configure it manually. (Refer back to
Figure 11-1 for an example of a basic config file.)
3. Save the configuration using the write file command as described in Section 11.2.2.2.