Specifications

Logging And Network Management Command Set
Configuring NetFlow
10-156 Matrix DFE-Gold Series Configuration Guide
10.2.8.3 clear netflow
Use this command to clear NetFlow parameters to factory defaults.
clear netflow [cache] [all] [export-destination ip-address [udp-port]]
[export-interval] [port port-string]
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Example
This example shows how to clear the Netflow cache
:
This example shows how to clear the Netflow collection on port ge.1.11:
cache Clears the collection status for a NetFlow cache.
all Clears all NetFlow configuration back to factory defaults.
export-
destination
ip-address
udp-port
Clears the collector with specified address.
ip-address specifies the IP address of the NetFlow
collector.
(Optional) udp-port specifies the UDP port number used by
NetFlow collector (default is 2055).
export-interval Clears the active flow timer value back to the default value
of 30 minutes.
port
<port-string>
Clears the collection status on a port(s).
Matrix(rw)->clear netflow cache
Matrix(rw)->clear netflow port ge.1.11