Specifications

Logging And Network Management Command Set
Configuring NetFlow
Matrix DFE-Gold Series Configuration Guide 10-155
10.2.8.2 set netflow
Use this command to configure NetFlow.
set netflow [cache {enable | disable}] [export-destination ip-address [udp-port]]
[export-interval interval] [port port-string {enable | disable}]
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write
Examples
This example shows how to enable Netflow cache
:
This example shows how to set the IP address of the Netflow collector:
This example shows how to enable Netflow collector on port ge.1.11:
cache enable |
disable
Enable or disable the collection for a NetFlow cache
export-
destination
ip-address
udp-port
Sets the destination IP address of NetFlow collector.
ip-address specifies the IP address of the NetFlow collect.
(Optional) udp-port specifies the UDP port number used by
the NetFlow collector (default is 2055).
export-interval
interval
Set the active flow timer value, between 1 to 60 minutes.
The default value is 30 minutes.
port port-string
enable | disable
Enable or disable NetFlow collection on a port(s)
Matrix(rw)->set netflow cache enable
Matrix(rw)->set netflow export-destination 10.10.1.1
Matrix(rw)->set netflow port ge.1.11 enable