Specifications

Logging And Network Management Command Set
Configuring NetFlow
10-152 Matrix DFE-Gold Series Configuration Guide
10.2.8 Configuring NetFlow
Purpose
Netflow is a software feature and also the name of an open (but proprietary) Cisco protocol for
collecting IP traffic information. Devices with NetFlow enabled generate netflow records, which
are exported from the device in UDP packets and collected using a NetFlow collector.
Commands
Commands to configure NetFlow are listed below and described in the associated section as shown.
• show netflow (Section 10.2.8.1)
• set netflow(Section 10.2.8.2)
• clear netflow(Section 10.2.8.3)