Specifications

Logging And Network Management Command Set
Configuring RMON
10-86 Matrix DFE-Gold Series Configuration Guide
10.2.4.28 set rmon channel
Use this command to configure an RMON channel entry.
set rmon channel index port-string [accept {matched | failed}] [control {on |
off}] [onevent onevent] [offevent offevent] [event event] [estatus {ready | fired |
always}] [description description] [owner owner]
Syntax Description
index Specifies an index number for this entry. An entry will
automatically be created if an unused index number is
chosen. Maximum number of entries is 2. Maximum
value is 65535.
port-string Specifies the port on which traffic will be monitored.
accept matched |
failed
(Optional) Specifies the action of the filters on this
channel as:
• matched - Packets will be accepted on filter matches
• failed - Packets will be accepted if they fail a match
control on | off (Optional) Enables or disables control of the flow of data
through the channel.
onevent onevent (Optional) Specifies the index of the RMON event that
will turn this channel on.
offevent offevent (Optional) Specifies the index of the RMON event that
will turn this channel off.
event event (Optional) Specifies the event to be triggered when the
channel is on and a packet is accepted
estatus ready |
fired | always
(Optional) Specifies the status of the event as:
• ready - A single event may be generated.
• fired - No additional events may be generated.
• always - An event will be generated for every match.
description
description
(Optional) Specifies a description for this channel.
owner (Optional) Specifies the name of the entity that
configured this entry.