Specifications

Logging And Network Management Command Set
Configuring System Logging
Matrix DFE-Gold Series Configuration Guide 10-5
Table 10-1 show logging all Output Details
Output What It Displays...
Application A mnemonic abbreviation of the textual description for
applications being logged.
Current Severity
Level
Severity level (1 - 8) at which the server is logging messages
for the listed application. For details on setting this value
using the set logging application command, refer to
Section 10.2.1.9.
Defaults Default facility name, severity level and UDP port
designation (as described below.) For details on setting this
value using the set logging defaults command, refer to
Section 10.2.1.6.
IP Address Syslog server’s IP address. For details on setting this using
the set logging server command, refer to Section 10.2.1.3.
Facility Syslog facility that will be encoded in messages sent to this
server. Valid values are: local0 to local7.
Severity Severity level at which the server is logging messages.
Description Text string description of this facility/server.
Port UDP port the client uses to send to the server.
Status Whether or not this Syslog configuration is currently
enabled or disabled.