Specifications

Port Priority and Rate Limiting Configuration Command Set
Configuring Priority to Transmit Queue Mapping
8-6 Matrix DFE-Gold Series Configuration Guide
8.3.2 Configuring Priority to Transmit Queue Mapping
Purpose
To perform the following:
• View the current priority to transmit queue mapping of each port, which includes both physical
and virtual ports.
• Configure each port to either transmit frames according to the port priority transmit queues (set
using the set port priority command described back in Section 8.3.1.2), or according to a
priority based on a percentage of port transmission capacity (set using the set priority queue
command described in Section 8.3.2.2).
• Clear current port priority queue settings for one or more ports.
Commands
The commands used in configuring transmit priority queues are listed below and described in the
associated section.
• show port priority-queue (Section 8.3.2.1)
• set port priority-queue (Section 8.3.2.2)
• clear port priority-queue (Section 8.3.2.3)