Specifications

Policy Classification Configuration Command Set
Configuring Policy Class of Service (CoS)
Matrix DFE-Gold Series Configuration Guide 7-39
Example
This example shows how to display all Class of Service port type information. In this case, no new
port groups have been configured, so information for the two device default groups of 0 and 1 are
shown:
Matrix(rw)->show cos port-type
Number of resources: Supported rate types:
txq = transmit queue(s) perc = percentage
irl = inbound rate limiter(s) pps = packets per second
orl = outbound rate limiter(s) Kbps = kilobits per second
Mbps = megabits per second
Gbps = gigabits per second
Tbps = terabits per second
Number of
slices /
Port type Number of Supported Eligible Unselected
Index description queues rate type ports ports
----- ------------ --------- --------- ----------------- --------------
0 DFE-P 16Q 64/16 perc ge.1.1-12 ge.1.1-12
Kbps
Mbps
Gbps
1 DFE-P 4Q 32/4 perc ge.2.1-30; ge.2.1-30;
Kbps ge.3.1-30; ge.3.1-30;
Mbps ge.4.1-30; ge.4.1-30;
Gbps fe.6.1-48; fe.6.1-48;
ge.6.1-6; ge.6.1-6;
fe.7.1-72 fe.7.1-72
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ----------------- --------------
0 DFE-P 32 IRL 32 irl perc ge.1.1-12 ge.1.1-12
Kbps
Mbps
Gbps
1 DFE-P 8 IRL 8 irl perc ge.2.1-30; ge.2.1-30;
Kbps ge.3.1-30; ge.3.1-30;
Mbps ge.4.1-30; ge.4.1-30;
Gbps fe.6.1-48; fe.6.1-48;
ge.6.1-6; ge.6.1-6;
fe.7.1-72 fe.7.1-72