Specifications

Process Overview: Policy Classification Configuration
Configuring Policy Profiles
7-2 Matrix DFE-Gold Series Configuration Guide
7.2 PROCESS OVERVIEW: POLICY CLASSIFICATION
CONFIGURATION
Use the following steps as a guide to configure policy classification on the device:
1. Configuring policy profiles (Section 7.3.1)
2. Assigning classification rules to policy profiles (Section 7.3.2)
3. Configuring policy-based Class of Service (CoS) (Section 7.3.3)
7.3 POLICY CLASSIFICATION CONFIGURATION COMMAND SET
7.3.1 Configuring Policy Profiles
Purpose
To review, create, change and remove policy profiles for managing network resources.
Commands
The commands used to review and configure policy profiles are listed below and described in the
associated section as shown.
• show policy profile (Section 7.3.1.1)
• set policy profile (Section 7.3.1.2)
• clear policy profile (Section 7.3.1.3)
• show policy invalid (Section 7.3.1.4)
• set policy invalid action (Section 7.3.1.5)
• clear policy invalid action (Section 7.3.1.6)